Tineco Floor One S3 FAQ - Biggest Smart Vacuum Questions

I'm a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Do you have questions about your Tineco Floor One S3? Maybe you’re thinking of getting one, but you haven’t made your decision yet. We’re here to answer all your questions about this powerful smart cordless wet/dry vacuum. Read on and get all the info you need to make a decision or to repair your existing vacuum.

Can Tineco Floor One S3 Be Used on Carpet?

We’ve done many Tineco Floor One S3 reviews. You can see them below:

So, does Tineco Floor One S3 work on carpet? Unfortunately this model cannot be used on rugs or carpets. This is common with many floor cleaners, but we made sure to mark which models can and cannot be used on carpets if that’s what you’re looking for.

While this doesn’t work on carpets, it does work on nearly every type of hard floor. It works on sealed wood, laminate, tile, and much more.

How to Use Tineco Floor One S3?

Using this smart wet/dry cordless vacuum is easy. Despite the water tanks, app integration, multiple speeds, and other features, this is very simple to use.

If you just received your vacuum, then start by charging it. Connect the Tineco charging base to a wall outlet and then rest the vacuum inside the charging base. You should then connect it to the Tineco app. This is optional, but it gives you helpful information about the vacuum (such as whether the filter or brush need to be replaced, and other performance issues).

Pair Tineco App and Vacuum

How do you connect the Tineco app to Floor One S3? Here are the step by step instructions:

Download the Tineco app to your device (Android or Apple) and select your vacuum model
Press the power button on the vacuum for two seconds. This will initiate the connection
Turn the vacuum around and find the barcode. Scan it with your device
Press and hold the WiFi reset button for three seconds. This is also on the back of the vacuum and several inches above the barcode
Wait for the two devices to connect (should only take a few seconds), and the two will be paired

How to Use Tineco Floor One S3

After that, now you have to load water into the clean water tank. This is the tank on the front. Push down on the lever and remove the tank. Add a cap of cleaning solution (if you’d like) and fill the tank with tap water. Place the clean water tank back into the vacuum.

Push the power button and your S3 will begin running in Auto mode. This is best for general cleaning. It will modulate the power as needed based on the dirt, debris, or liquids around you.

If you need more power, then push the Max/Auto button. This will switch from Auto Mode to Max Mode. You can switch back by pushing the button again. When you’re finished, push the power button again to turn it off.

You should then remove the dirty water tank, empty it, and place the tank back in the vacuum. Return the vacuum to the charging base and allow it to charge. That’s all there is to it.

Check Price: Tineco Floor One S3 ->

How to Clean Tineco Floor One S3?

Among the many features you get with this vacuum, one of the best is that this is a self-cleaning wet/dry vacuum. You don’t have to remove the brush roll and clean it manually. The steps are also very simple and can be done in minutes.

Start by charging the vacuum. The battery must be above 20% to do this. Simply place it in the charging base. It will stay here throughout the whole process.

Fill the clean water tank. It’s also best if the dirty water tank is empty before starting.

On the top of the handle you will see the self-cleaning button. This looks like a large water drop with sparkles next to it. Push the button to begin self-cleaning. There will be a voice prompt letting you know that the vacuum is cleaning itself. You will hear the brush moving and the dirty water tank will fill up.

Allow this to continue until there is another voice prompt telling you that self-cleaning is finished. You can then empty the dirty water tank and your vacuum will be clean.

How to Restart Tineco Floor One S3?

Restarting your Tineco S3 is about the same as restarting any other device or appliance. You will see the power button on the handle. Simply push and hold this button for about five seconds. This should turn the vacuum off.

Push the button again and it will turn the vacuum back on. You may need to do this to fix some errors, or if you’re troubleshooting certain problems with the vacuum. Most owners never need to do this, but the good news is that restarting is easy and it corrects many of the errors that might randomly occur.

Where to Buy Tineco Floor One S3?

There are many places where you can buy this vacuum. We recommend buying Tineco Floor One S3 from Amazon. Not only do you get the best price, but you can also get free shipping and it often only takes a day or two until the vacuum is at your door.

While there are some retailers that also sell this model, you can easily find this on Amazon. Another benefit is that you can find the other Tineco models there. So if you’re unsure if you want Tineco S3, S5, or iFloor 3, then you can compare them all directly at Amazon to see which is best for you.

Who Sells Tineco Floor One S3?

As we mentioned above, you can find this at some retailers, but we recommend getting it from Amazon for the best price, and so you can compare other models against each other to see which is right for you.

Many people love the S3, but you might find that you want more power from the S5 or S5 Pro, or maybe you want the different features from the iFloor 3.

Plus, if you’re looking for Tineco Floor One S3 near me, then you can easily have it shipped to your location from Amazon. They ship just about everywhere, so you don’t need to worry about hunting down a retailer that has the vacuum.

Why is My Tineco Floor One S3 Not Charging?

This is a rare issue, but some people find that their Tineco vacuum isn’t charging. First of all, make sure that you are using the official Tineco charging adapter. While the adapter might look similar to other adapters, it’s best if you use the official one.

Next, make sure that the adapter and charging base are properly connected. We recommend removing both the adapter and charging port and reconnecting them.

If problems persist, then try another outlet. You will know your Tineco is charging as there will be an LED light indicating that it is being charged. If this still doesn’t work, then make sure the vacuum is properly set in the charging base. We recommend removing the vacuum and placing it back in.

If you still have problems, then you should consider getting another power cable or charging base. This should fix the issue.

Check Price: Tineco Floor One S3 ->

Where is Tineco Floor One S3 Made In?

Tineco is quickly becoming a powerful brand and many people are wondering where it’s made and how it has so much manufacturing power. The Tineco brand is located in China and it’s actually a subsidiary of EcoVacs, which is a rival to Roomba and the largest vacuum manufacturer in China.

This entire brand, from EcoVacs to Tineco, is known for power, innovation, and unique features. It comes as no surprise then that this brand has so many powerful and versatile floor cleaners, stick vacuums, and more.

They also recently established an office in America, specifically in Seattle, Washington. Still, the vast majority of vacuums are produced in China.

Can You use Tineco Floor One S3 Without Water?

Some floor cleaners and wet/dry vacs only work if they have water loaded into them, so you might be wondering if Tineco works without water. The answer is that yes it does, and this is how you do dry vacuuming.

Sometimes you have a dry mess like rice, cereal, or dirt particles on the floor. Dry vacuuming allows you to pick them up with ease.

Tineco Floor One S3 Not Suctioning

Is your Tineco Floor One S3 not working? Sometimes you’ll find that it won’t pick up wet or dry debris no matter how much you try. If this is happening to you, then there is a fairly easy solution.

First check the debris channel. Open it up and clear out anything that might be stuck there. If that doesn’t correct the issue, then check the HEPA filter. Clean the filter and reinstall it. This should fix the problem.